Shop

Joint for arms Converts 3/8'' screw to 1/4'' Allows using accessory arm as column extension Made of aluminium

Holds full-frame CSC (without grip) and 70-200/2.8 lens attached New M-Guard™ provides the highest level of gear protection Safe rear access & top opening to 100% padded gear compartment SAS-TEC structural base reinforcement for extra shock protection Double side tripod connection points for...

Load capacity: 9 kg/19.8 lbs., Max Height: 450 cm/177.2'' Chrome plated steel stand & steel risers, silver only. Leg: 20 mm x 20 mm, 1 Levelling Leg. Wheels not recommended 4 sections, 3 risers, Ø: 35, 30, 25, 20 mm Mobile Column w/double locking T-knobs on the spider castings

It is for the base of the Backlight Stand Two section black aluminum pole to raise small lighting fixture It can be used as a small portable boom

Holds full-frame CSC with attached grip and 70-200/2.8 lens New M-Guard™ provides the highest level of gear protection Safe rear access & top opening to 100% padded gear compartment SAS-TEC structural base reinforcement for extra shock protection Double side tripod connection points for...

The largest reusable all in one Chroma Key background kit Ultra-Fast assembly time Ideal for working on location Huge working area, small pack down size Effortlessly packs down into included carry bag

This filter reduces light entering the camera lens by 6 stops Compatible with all threaded 67mm lenses Flexibility to allow for wider and slower shutter speeds Multicoated optical glass for water and oil repellence. reusable case included

Low base stainless steel column & legs with chrome steel risers. Rapid and fine levelling leg for easy set up on any terrain 80 mm/ 3.14'' Braked wheels- foam-filled for various terrain #474 3 sections, 2 risers. Ø: 70, 60, 50 mm Leg Ø: 35 mm 130 cm/51.2' footprint great for use on...

pivoting clamp for use with all Super Booms and Heavy Duty Booms for 35mm diameter boom shafts 1/8'' male, and 5/8'' female receptor

Heavy-duty and lightweight photographic hard-case made in Italy IP67 testing approved for water and dust protection Built to withstand the toughest conditions of use Safe release system latches for optimum security and protection Durable 2-stage telescopic handle with self-locking system

It allows mounting of the 3085 Boom Arm to a heavy duty stand It permits tilt, swing and swivel Easy to use

Stable and secure with double leg bracing Comes with handy universal head type, socket and stud Includes an innovative levelling leg for rough terrain Handles up to 40kg

Spigot with two 3/8'' screws Versatile use Two 3/8'' screw attachments Made of Brass

BP-U adapter with magnetic holder

Ultra small clamp tripod with a variety uses Supports payload of up to 2kg on its vertical axis Female and male 6.35mm and 9.5mm ends Aluminium construction with black and red anodized finish Ability to securely hold thin bars (8-15mm)

Tripod Dolly Telescopic aluminium construction Design for a heavy weight tripod Made in EU by Slidekamera

Brilliant footage smoothness, supremely light and stable Able to support up to 4Kg, weighs just 1kg Fully foldable head and base feet for maximum portability Patented fluid base for judder-free panning action Twist-locks ensure easy set-up and extreme compactness

Suction cup for flat non-porous surfaces Ball-joint socket to move the 360o camera in different positions Dual-sided design 5/8” adapter spigot included Extremely sturdy retaining mechanism with safety pin Supports up to 2kg

EURO MOUNT Adapter (MALE) - adapt your support to the industry-standard mounting system.

6Version sold without packaging The most versatile lighting accessory It successfully holds equipment weighing up to 15Kg TUV safety certificate Ergonomic lock handle A wide range of compatible adapters and accessories

Set of 3 reversible rubber/metal spiked feet Supplied with a dedicated fixing tool Made of a special hard anodised aluminium alloy Extremely resistant to corrosio

Extend from 66 to 188cm (from 25 to 74 in) Made in aluminium black 3 sections

Baby roller stand with low leg base and braked wheels Steel column, aluminium risers & captive locking T-knob handles. 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg ø: 20 x 20 mm Nuts & bolts construction complete with levelling leg Mobile Column w/double locking T-knobs on the spider...

Junior roller stand with folding leg base and braked wheels Very popular stand for holding LED, fresnels and smaller HMI's. 4 sections, 3 risers. Ø: 45, 40, 35, 30 mm. Steel column, aluminium risers & captive locking T-knob handles. Folding base great for self-standing storage when not in use

Allow positioning of 2 heads on a 90° perpendicular angle Mounts on any column with 3/8'' thread and 60mm disc 3/8'' female thread attachment

Junior roller stand with low leg base and braked wheels (A9000N) Steel column, steel risers & captive locking T-knob handles. 3 sections, 2 risers. Ø: 45, 40, 35 mm. Max height:360 cm/141.7'' Mobile Column w/double locking T-knobs on the spider castings Wide footprint for extra stability on...

Allow positioning of 2 heads on a 90° perpendicular angle Mounts on any column with 3/8'' thread and 60mm disc 3/8'' female thread attachment 2 positional head mounts on the side arm for mounting of 4 hea

Baby roller stand with low leg base and braked wheels Steel column, aluminium risers & captive locking T-knob handles. 4 sections, 3 risers. Ø: 35, 30, 25, 20 mm. Leg Ø: 20 x 20 mm Nuts & bolts construction complete with levelling leg Mobile Column w/double locking T-knobs on the spider...

Geared column with clamp Compatible with table thickness from 18-38mm Adjustable between 5cm and 66cm 3/8'' screw attachment

Top attachment 5/8'' (16mm) stud Attachement 5/8'' (16mm) socket Aluminium Construction  9,7cm in height

25mm to 65mm gaffer grip for great versatility Adjustable jaws ensure a tight and secure grip Complete with two 16mm baby studs for added versatility Designed with world-leading Italian quality standards Gaffer grip attaches to a wide range of accessories

16mm Hexgon stud for Super Clamp Top attachment 16mm Hexgon stud for Super Clamp Used to fix two superclamp 16,5cm in height

It extends the height of your heavy duty cine stand 49.2 - 82.7'' It has two black sections, one riser Made of aluminium

Minimum extension is 4.3ft (1.3m), the maximum is 7.25ft (2.2m) One riser is 35mm in diameter, the second is 30mm in diameter Chrome steel extension

V-Mount Adapter with V-Mount Plate  Quick release set for mount V-Mount/V-Lock battery and accessories

Made from gravity cast aluminium in black finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' TÜV/SÜD certified Max Capacity 300 kg/661.4 lbs when using the 28 mm/1 1/8 Socket Includes safety cable with pin to secure junior pins in sock

Standard 1/4-20 inch thread mount for cameras Replacement camera platform for the Magic Arm Made of aluminium Standard 1/4 thread for cameras

Color: blackMaterial: hard anodized aluminium 

16 mm/ 5/8'' baby pin: scissor clip designed for drop ceilings Ideal for small and medium light fixtures Works well with C1005 to hold cables Easily tighten and remove scissor clip by spinning the baby pin Special adapters should be carried in all kits

For polystyrene Gobo's Supplied with 1/4'' and 3/8''female attachments Robust construction Size: 12,5 x 20cm

Color: blackMaterial: hard anodized aluminium

Cable support with scissor clip designed for drop ceilings Ideal to support cables and cords from drop ceilings Works well with C1000 baby pin scissor clips Easily tighten and remove scissor clip by turning thumb screw Special adapters should be carried in all kits